-->
Baud Rate Serial Port Cisco
Sets the data rate in bits per second (baud) for serial data transmission. For communicating with Serial Monitor, make sure to use one of the baud rates listed in the menu at the bottom right corner of its screen. You can, however, specify other rates - for example, to communicate over pins 0 and 1. UART serial can tolerate slight baud rate mismatches. $ endgroup $ – Peter Green Jul 30 '17 at 10:33 $ begingroup $ The uart starts in the middle of the START bit and must stay near the middle of the STOP bit after serializing 7-10 bits.
- Feb 14, 2019 I have rfid reader of baud rate 115200.and arduino uno (a/c to some people after googling,that Arduino uno doesn't support 115200 baudrate,if you want to use that baudrate,u have to use built in hardware serial ports).
- Recent UART s with receive buffers will work at all serial console bit rates, this includes models 16550A, 16552, 16650, 16654, 16750, 16850 and 16950. Unless you have good reason, use the popular bit rate of 9600 bits per second. This is the default bit rate of a great many devices.
- The baud rate you select in the software must match the baud rate of the data logger serial port. For example, CR200-series dataloggers and CR10X dataloggers are always 9600 baud. CR1000 and similar data loggers can handle baud rates up to 115200.
- Standard baud rates include 110, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000 and 256000 bits per second. To display the supported baud rates for the serial ports on your platform, see Finding Serial Port Information for Your Platform.
Definition
Property Value
Baud Rate Serial Port C#
The baud rate.
Exceptions
Com Baud Rates
The baud rate specified is less than or equal to zero, or is greater than the maximum allowable baud rate for the device.
The port is in an invalid state.
-or-
An attempt to set the state of the underlying port failed. For example, the parameters passed from this SerialPort object were invalid.
Examples
The following example shows how to set the BaudRate property to 9600.
The following example demonstrates the use of the SerialPort class to allow two users to chat from two separate computers connected by a null modem cable. In this example, the users are prompted for the port settings and a username before chatting. This code example is part of a larger code example provided for the SerialPort class.
Remarks
The baud rate must be supported by the user's serial driver. The default value is 9600 bits per second (bps).